One-stage and Two-stage stainless steel RO water treatment

Short Description:

Reverse osmosis technology is a modern high technology developed recently in China. Reverse osmosis is to separate water from solution after it permeates the specially-made semi-transparent membrane through exerting a pressure that is higher than the osmosis pressure on the solution, As this process is reverse to the natural permeation direction, it is called reverse osmosis. According to different osmosis pressures of various materials, the process of reverse osmosis with a pressure higher than the osmosis pressure can be used to reach the purposes of separation, extraction, purification and concentration of a certain solution it does not need heating and there is no phase changing process; therefore, it saves more energy than traditional process.

Send email to us

Product Detail

Product Tags

description

This system occupy little space, easy to operate, wide application range.
When used for disposing industrial water, the reverse osmosis device does not consume large amounts of acids and alkalis, and there is no secondary pollution. In addition, its operation cost is also low.
Reverse osmosis desalting rate >99%, machine desalting rate >97%. 98% of organic matters, colloids and bacteria can be removed.
Finished water under good electric conductivity, one stages 10 ≤ μs/cm, two stage around 2-3 μs/cm, EDl ≤ 0.5 μs/cm (base on raw water ≤ 300 μs/cm)
High operation automation degree. It is unattended. The machine will automatically stop in case of water sufficiency and automatically start in case of no water. Timed flushing of front filtering materials by automatic controller.
Automatic flushing of reverse osmosis film by lC microcomputer controller. Online display of raw water and pure water electric conductivity.
Imported parts account for over 90%.

Model	Capacity（T/H)	Power(K)	Recovery（%)	One-stage Finished Water Conductivity (Hs/cr)	Two-stage Finished Water Conductivity( Hs/cm)	EDI Finished Water Conductivity( Hs/CM)	Raw Water Conductivity( Hs/cH)
R0-500	0.5	0.75	55-75	≤10	2-3-	≤0.5	≤300
R0-1000	1.0	2.2	55-75
R0-2000	2.0	4.0	55-75
R0-3000	3.0	5.5	55-75
R0-5000	5.0	7.5	55-75
R0-6000	6.0	7.5	55-75
R0-10000	10.0	11	55-75
R0-20000	20.0	15	55-75

No	Item	Data
1	Description	ure water treatment purifying machine
2	Voltage	AC380V-3phase
3	Component	sand filter+carbon filter+soften filter+precision filter+Ro fitler
4	Pure water production capacity	50OL/H,500-500OL/H can be customized
5	Filter principle	Physical filtration+reverse osmosis filtration
6	Control	Button or PLC+Touch screen

Features

1. The reverse osmosis device has small volume, simple operation and wide application range.
2. Using reverse osmosis device to treat industrial water does not consume a lot of acid and alkali, and has no secondary pollution. Its operating cost is also relatively low.
3. The desalination rate of reverse osmosis is ≥ 99%, and the desalination rate of the whole machine is ≥ 97%, which can effectively remove 98% of organic matter, colloid, bacteria, etc.
4. The conductivity of produced water is good, and the first level is ≤ 10 μ S/cm, the second level is 2-3 μ S/cm, EDI ≤ 0.5 μ S/cm (raw water ≤ 300 μ s/cm）。
5. High degree of operation automation, automatic start and stop, automatic control and timing washing of the front ferry, automatic washing of the reverse osmosis membrane by IC microcomputer controller, and online display of conductivity.
6. More than 90% of imported parts.

Flowchart for Two-stage Type:
Raw water→ Raw water tank →Raw water pump→Sand filter→Carbon filter→safty filter→（high pressure pump）one stage RO→Middle water tank→（High pressure pump）two stage RO→stainless steel pure water tank→pure water pump→Using pure water point