Cosmetic industrial pure water treatment machine RO water Treatment machine

Short Description:

Medical chemical cosmetic pure water production plant RO water treatment system The RO water purifying system firstly produced for such industries as cosmetics, pharmacy, food and electronics has been deeply favored by users for its stable water quality and simple operation. The system solves the troubles of frequent regeneration and cleaning during the use of ion exchanging water purifier. By adopting physical principle, it enables the water to pass the reverse osmosis film with a diameter of one ten-thousandth of a micron and separates impurities, ion, microbes and colloids in the water, so as to meet the water requirements in cosmetics, pharmacy, electronics and food industries.

Send email to us

Product Detail

Product Tags

description

This system occupy little space, easy to operate, wide application range.
When used for disposing industrial water, the reverse osmosis device does not consume large amounts of acids and alkalis, and there is no secondary pollution. In addition, its operation cost is also low.
Reverse osmosis desalting rate >99%, machine desalting rate >97%. 98% of organic matters, colloids and bacteria can be removed.
Finished water under good electric conductivity, one stages 10 ≤ μs/cm, two stage around 2-3 μs/cm, EDl ≤ 0.5 μs/cm (base on raw water ≤ 300 μs/cm)
High operation automation degree. It is unattended. The machine will automatically stop in case of water sufficiency and automatically start in case of no water. Timed flushing of front filtering materials by automatic controller.
Automatic flushing of reverse osmosis film by lC microcomputer controller. Online display of raw water and pure water electric conductivity.
Imported parts account for over 90%.

Making pure water can carry through the process as follows
(Source:City water supply)

A.Drinking pure water technology
Raw waterRaw water pumpMulti-medium filter Active carbon adsorption filtrationSecondary filterReverse osmosisPure water tankFilling pumpPoint of using water

Ozonizer generatorAir compressor

B.Cosmetic using water technology
Raw waterRaw water pumpMulti-medium filterActive carbon adsorption filtrationSoftening filterSecondary filter
First-level anti-filtering applianceIntermediate water tank
Second-level anti-filtering applianceUltraviolet sterilization
Yielding water

Brief introduction on pretreatment equipment

Making equipment for pure water and high purity water often consists of pretreatment, desalination and polishing.The main purpose of pretreatment is to eliminate suspended matter, animalcule, colloid, diffluence gas and some organics in raw water entirely or partly, besides, it creates condition for desalination and after-treatment procedure to meet requirements for reverse osmosis of water inflow. The pretreatment equipment mainly have: a. Multi-medium filter. b. Active carbon adsorption filtration. c. Secondary filter .

Model	Capacity（T/H)	Power(K)	Recovery（%)	One-stage Finished Water Conductivity (Hs/cr)	Two-stage Finished Water Conductivity( Hs/cm)	EDI Finished Water Conductivity( Hs/CM)	Raw Water Conductivity( Hs/cH)
R0-500	0.5	0.75	55-75	≤10	2-3-	≤0.5	≤300
R0-1000	1.0	2.2	55-75
R0-2000	2.0	4.0	55-75
R0-3000	3.0	5.5	55-75
R0-5000	5.0	7.5	55-75
R0-6000	6.0	7.5	55-75
R0-10000	10.0	11	55-75
R0-20000	20.0	15	55-75

No	Item	Data
1	Description	ure water treatment purifying machine
2	Voltage	AC380V-3phase
3	Component	sand filter+carbon filter+soften filter+precision filter+Ro fitler
4	Pure water production capacity	50OL/H,500-500OL/H can be customized
5	Filter principle	Physical filtration+reverse osmosis filtration
6	Control	Button or PLC+Touch screen

Features

1,The system occupy little space, easy to operate, wide application range.
2, when used for disposing industrial water, the reverse osmosis device does not consume large amounts of acids and alkalis, and here is no secondary pollution in addition, operation cost is also low.
3, Finished water has a low electric conductivity, one stage ≤ 10us/cm,two stage around 2-3 us/cm,EDI ≤ 0.5us/cm (base on raw water ≤ 300us/cm).
4,Imported parts account for 90%.
5.We can produce different kinds as customer’s requirement, such as 500L/H,1000L/H,1500L/H…6000L/H
Design Basis and principle
(1) Water output: 500L/H-5000L/H
(2) Feed water requirements: Municipal water, reservoir water, ground water
(3) Outflow water standard: Conductivity≤10μs, other measures accord with national standard of drinking water.
(4) Water feed method: Continuously
(5) Power supply: Single phase,380V,50HZ,ground resistance10Ω.
(6) Design range: From raw water tank to terminals.

Flowchart for Two-stage Type:
Raw water→ Raw water tank →Raw water pump→Sand filter→Carbon filter→safty filter→（high pressure pump）one stage RO→Middle water tank→（High pressure pump）two stage RO→stainless steel pure water tank→pure water pump→Using pure water point